The air floating optical table provides superior vibration isolation for precise experimental setups. As a leading vibration isolation optical table manufacturer and optical breadboard supplier, it guarantees stability and customization.
Engineered by a leading welding optical table manufacturer, this platform delivers ultra-low vibration isolation tailored to laboratory and industrial researchers who require uncompromising stability. Designed specifically for precision applications, it supports integration with an optical breadboard or breadboard optical table, serving users who operate sensitive optical instrumentation such as microscopes and motorized stages. This solution enhances measurement accuracy in environments demanding minimal vibration interference, meeting the rigorous operational standards of scientific institutions and advanced manufacturing.
Built with high-grade stainless steel and incorporating a honeycomb structural design, this platform ensures superior flatness with a surface tolerance of ≤0.05 mm/m² and a matt finish to reduce reflectivity. It employs ultra-thin air springs providing vibration isolation frequencies between 1.0 and 2.0 Hz, coupled with porous quasi-laminar flow damping to suppress broadband vibrations effectively. Additional specifications include automatic leveling mechanisms, customizable mounting holes compatible with clean room standards, and high load capacity up to 800 kg. The product supports seamless compatibility with a variety of optical table breadboard configurations, enabling precise calibration and repeatable performance metrics.
Widely utilized in precision optical systems, this product from a skilled optical breadboard manufacturer supports applications such as interferometry, laser scanning, spectrometry, and biomedical research setups. Its adaptability to clean room environments and inclusion of sealed mounting cups position the device as a key component for contamination-controlled studies. The combination of a welding optical table manufacturer’s expertise and integration readiness with an optical breadboard ensures enhanced workflow efficiency, improved data reliability, and reliable vibration control essential for quality assurance in high-precision scientific and industrial equipment.
The design foundation reflects expertise from a welding optical table manufacturer focused on rigidity and modular adaptability. Its stainless steel honeycomb platform allows efficient load distribution and excellent flatness critical for optical breadboard applications. Customizable non-magnetic constructs and specially designed mounting holes facilitate tailored setups on breadboard optical tables, boosting versatility across research and manufacturing settings. These adjustable components support streamlined assembly and maintenance processes, enabling system integrators to optimize infrastructure without sacrificing precision or compliance standards.
This solution delivers unmatched vibration isolation performance through ultra-thin air springs and well-engineered damping systems, promoting stable operation under demanding conditions typical for optical breadboard users. Automated pneumatic leveling enhances ease of use while ensuring consistent performance without manual recalibration. Users benefit from superior surface stability and robust load handling capability, which collectively minimize downtime and improve experimental accuracy. Such attributes increase return on investment by reducing operational disruptions and elevating the quality of research outputs in precision instrumentation environments.
|
Inherent Frequency
|
1.0-2.0Hz, vertically; 1.0-2.0Hz, horizontall
|
|
Vibration Isolation Structur
|
Ultra thin air spring
|
|
Leveling Typ
|
Automat
|
|
Vibration Damping Typ
|
Porous quasi-laminar flow damping element with diffuse
|
|
Total Table Heigh
|
800mm
|
|
Working Air Pressur
|
0.2-0.4MPa
|
|
Compressed Air Sourc
|
Silent compressor (noise level) <50dB
|
|
Vibration Isolating Efficiency
|
82～88%@5Hz, 86～95%@10Hz, vertically
78～86%@5Hz, 84～92%@10Hz, horizontall
|
|
Re-leveling Accurac
|
±0.1mm
|
|
Table Top Flatnes
|
≤0.05mm/m²
|
|
Surfaced Roughnes
|
≤0.8μm, matt surface finis
|
|
Isolator Height Adjustment Rang
|
±10mm
|
|
Mounting Holes
|
M6 tapped holes on 25mm grid. Hole to edge 12.5mm or 37.5mm
|
|
Top Skin
|
5mm
|
|
Bottom Skin
|
4mm
|
|
Material
|
Stainless Steel
|
The ZDT series products feature a honeycomb structured platform combined with an automatic pneumatic levitation isolation system. The platform is compatible with tunable dampers, which, after optimization, endows the optical platform with unparalleled performance and value. Compared to conventional platforms, its exceptional specific stiffness reduces the impact of laboratory environmental loads and enhances the utilization rate of equipment and instruments.
Inherently equipped with broadband damping properties, we further augment our platforms with tunable dampers, offering a distinct advantage over the narrowband dampers commonly found in the market. While narrowband dampers are efficacious only at a single, predetermined frequency, their application scope is undeniably limited. From a vibration perspective, the initial resonant frequencies have substantial influence; particularly, when instruments are mounted onto the upper platform, the fundamental mode or even higher modes may shift, potentially rendering narrowband dampers ineffective.
Conversely, our designed tunable dampers effectively address a broader range of mid-to-high frequencies, with a specially calibrated high-efficiency region spanning from 50 to 500Hz, where the attenuation effect is notably pronounced. This tailored approach ensures comprehensive vibration control tailored to the complex dynamics encountered in real-world applications.
| Model | Dimension(mm) | Height(mm) | Load Capacity(Kg) |
|---|---|---|---|
| POT-G09-06 | 900×600 | 800 | <135 |
| POT-G10-08 | 1000×800 | 800 | <200 |
| POT-G12-09 | 1200×900 | 800 | <270 |
| POT-G15-10 | 1500×1000 | 800 | <375 |
| POT-G18-10 | 1800×1000 | 800 | <450 |
| POT-G20-10 | 2000×1000 | 800 | <500 |
| POT-G12-12 | 1200×1200 | 800 | <360 |
| POT-G15-12 | 1500×1200 | 800 | <450 |
| POT-G18-12 | 1800×1200 | 800 | <540 |
| POT-G20-12 | 2000×1200 | 800 | <600 |
| POT-G24-12 | 2400×1200 | 800 | <720 |
| POT-G30-12 | 3000×1200 | 800 | <900 |
| POT-G15-15 | 1500×1500 | 800 | <560 |
| POT-G18-15 | 1800×1500 | 800 | <675 |
| POT-G20-15 | 2000×1500 | 800 | <750 |
| POT-G24-15 | 2400×1500 | 800 | <900 |
| POT-G30-15 | 3000×1500 | 800 | <1125 |
At OpticalTable, we specialize in providing top-tier optical equipment and precision components for research, industrial, and laboratory applications. Our focus is on delivering high-performance products that enhance the capabilities of optical systems, microscopes, and experimental setups. With years of expertise in the field, we supply advanced optical platforms such as motorized rotary stages, vibration isolation systems, and other cutting-edge components to support your scientific endeavors. Our commitment to quality, innovation, and customer satisfaction has made us a trusted partner in the optics industry.
1.High-Quality Products: We provide only the best, rigorously tested optical and precision components that ensure reliability and optimal performance in your experiments.
2.Customization Options: Our products are customizable to meet your specific research needs, from optical breadboards to microscope stages, ensuring perfect fit and functionality.
3.Expertise and Experience: With years of experience in the field of optics, we bring deep knowledge and technical support to every product we offer.
4.Competitive Pricing: We offer high-quality equipment at competitive prices, ensuring that you get the best value for your investment.
5.Global Reach and Support: Serving clients worldwide, we provide excellent customer service and technical support, wherever you are located.
